ACTUNI TOP

EddyStation HL | Maintenance Inspection

Portable Eddy Current Flaw Detector

The EddyStation HL is a portable eddy current flaw detector designed for conducting maintenance inspections at bridges and plants. Compact, lightweight, and powered by built-in battery, the detector is ideal for checking for flaws at sites where no power supply equipment is available.
Flaw detection parameter settings and results can be stored on the internal memory of the detector or on a USB flash drive. In addition, a touch pen can be used to write notes on the flaw detection screen. The detector comes with dedicated software that allows the operator to view stored flaw detection results and create reports on a PC.

EddyStation HL | Maintenance Inspection

Main Features

For maximum ease of use

For maximum ease of use

Thanks to the built-in battery, the EddyStation HL can be used at a variety of sites. Its dedicated case comes with a neck strap to prevent the detector from being accidentally dropped.
Also, the detector allows the operator to check for flaw signals by listening for beeps, so the operator can concentrate on performing flaw testing using both hands. Naturally, the detector has an earphone jack that helps the operator hear beeps even in noisy surroundings.

A bright, clear color display

The EddyStation HL includes a color LCD with brightness adjustment, enabling the operator to clearly see the screen, whether in a bright or dark location.

A bright, clear color display

A writable touchscreen

Featuring a touchscreen, the EddyStation HL allows the operator to write comments or remarks directly on the screen. Using dedicated software, the operator can also view stored results and print them with or without notes.

A writable touchscreen

Quick and simple waveform analysis

Quick and simple waveform analysis

Once flaw detection results are obtained and stored on a USB flash drive, the operator can plug it into a Windows PC and use our dedicated software to view the results and create data for reports.

　　　　Windows is a registered trademark of Microsoft Corporation in the United States and other countries.

Get ADOBE READER

Download the latest Adobe Acrobat Reader from http://www.adobe.com/.

Specifications

Probe Type Self-induction or mutual-induction
Method of Excitation Single frequency electromagnetic induction method
Detection method Synchronous detection
Test Frequency 1 kHz - 500 kHz (1 kHz steps)
Sensitivity 0.0 dB - 50.0 dB（0.5 dB steps）
Phase 0.0 deg - 359.5 deg（0.5 deg steps）
L.P.F. 250 Hz（Fixed）-18 dB/oct
H.P.F. OFF、0.1 Hz - 100.0 Hz
（0.1 Hz steps) -12 dB/oct
Memory Stores 20 test configurations
Sampling Frequency 4 kHz
Testing Window comparator
(X, Y, X abd Y, Z, Z-θ)
±0.01 V - ±2.50 V (0.01 V steps)
Display 480 × 272 pixels LCD touchscreen with backlight
Scale 0.05 V/div, 0.10 V/div, 0.25 V/div and 0.50 V/div
Analog Outputs DC ±2.5 V (X and Y signal)
Available while playbacking.
Dimensions W: 122 mm H: 50 mm D: 238 mm（not including rubber legs and connecters.）
Weight Body: approximately 1.3 kg (including rechargeable battery: approximately 300 g)
Power DC 7.2 V (DC 7 - 9 V)　approximately 6 hour operation
Rechargeable Battery Capacity 46 Wh (7.2 V 6400 mAh）
Accessories Two batteries (includes a spare battery),
battery charger, soft case,
USB flash drive (connected with the body)